SolarWorld SW135 poly 1.0 - 135 Watt Poly Solar Panel
Pallet Quantity (40 Solar Panels)
Partial Pallet Charge: $150 - You will be charged separately for partial pallet fees.
SolarWorld produces the best products with the highest quality, manufactured according to German and US quality standards in fully automated ISO 9001 and 14001 certified factories.Outstanding products
SolarWorld's modules were assessed by the ÖKO-TEST consumer magazine as "excellent".An experienced industry leader
With over 30 years of experience in off-grid solar applications – SolarWorld delivers top products and technical experience at the highest levels. Our modules are installed in over 100,000 Telecom/Industrial systems worldwide. Nobody else comes close.World‘s greenest solar manufacturer
The Silicon Valley Toxics Coalition named SolarWorld the greenest manufacturer in 2011. SolarWorld manufactures to the highest environmental and employment standards.
|Maximum power Pmax:||135 Wp|
|Open circuit voltage Voc:||21.9 V|
|Maximum power point voltage Vmpp:||17.7 V|
|Short circuit current Isc:||8.16 A|
|Maximum power point current Impp:||7.69 A|
|Maximum power Pmax:||98.2 Wp|
|Open circuit voltage Voc:||19.8 V|
|Maximum power point voltage Vmpp:||16.0 V|
|Short circuit current Isc:||6.58 A|
|Maximum power point current Impp:||6.15 A|
|Cells per module:||36|
|Cell type:||Poly crystalline|
|Cell dimensions:||6.14 in x 6.14 in (156 mm x 156 mm)|
|Front:||tempered glass (EN 12150)|
|TC Isc:||0.034 %/K|
|TC Voc:||-0.34 %/K|
|TC Pmpp:||-0.48 %/K|
|Maximum system voltage SC II:||1000 V|
|Maximum reverse current:||12 A|
|Increased snowload acc. to IEC 61215:||5.4 kN/m²|
|Number of bypass diodes:||2|
|Power tolerance:||+/- 5 %|
|Maximum outer cable diameter:||0.31 in (7.8 mm)|
|Maximum wire cross section:||0.006 in² (4 mm²)|
|Length:||59.37 in (1508 mm)|
|Width:||26.77 in (680 mm)|
|Height:||1.34 in (34 mm)|
|Weight:||25.02 lb (11.8 kg)|
The SolarWorld Sunmodule Advantage
Plus sorting get all the watts you pay for
SolarWorld unique plus sorting method ensures that our customers receive the watts they pay for. Every module is factory flash tested (at standard test conditions) to determine the peak rated power output, then sorted in 5-watt bin increments. SolarWorld power rating accounts for initial light-induced degradation (LID) so there are no surprises after installation.
With plus-sorting, SolarWorld delivers only modules that have greater than or equal to the nameplate-rated power. These power ratings are backed up with the factory flash report.
By delivering actual power, plus sorting ensures that systems operate at top eciency which results in maximum energy yield year after year. Plus-sorting eliminates nameplate uncertainty and our 5 W bin size makes mismatch losses negligible. Therefore associated de-rate factors in system modeling programs, such as PVWatts, PVsyst, and OnGrid can be minimized, predicting up to 5% greater annual yield.
SolarWorld linear performance guarantee long term performance assured
Because SolarWorld produces the highest quality, we can guarantee the best performance. That's why SolarWorld oers a 25-year linear performance guarantee* for all Sunmodule Plus panels purchased after January 1, 2011.
According to our guarantee, the actual power of a new module cannot deviate from the specified rated power by more than 3% during the first year; afterward, the power will not decrease by more than 0.7 percent of the rated power per year. So at year 11, the Sunmodule capacity is guaranteed to be at least 89.3% of the nameplate, compared with the industry standard guarantee of 80%. At year 20, it is still at least 83%, compared with the industry standard 80%. SolarWorld linear performance guarantee provides clear added value that you can take to the bank.
SolarWorld workmanship warranty
As a further expression of SolarWorld industry-leading quality, we have extended the Sunmodule product workmanship warranty to 10 years.