SolarWorld 140W Poly Solar Panel v1.0 Frame

$421.12 $322.42
(You save $98.70)
(No reviews yet) Write a Review
SKU:
SW140 poly 1.0
Availability:
Under a Pallet Available.
Weight:
25.02 LBS
Minimum Purchase:
6 units
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Warehouse:
CMCM
140W Poly Solar Panel

SolarWorld SW140 poly 1.0 - 140 Watt Poly Solar Panel

Pallet Quantity (40 Solar Panels)
Partial Pallet Charge: $150 - You will be charged separately for partial pallet fees.

sw130-140-cert.jpg

World class quality

SolarWorld produces the best products with the highest quality, manufactured according to German and US quality standards in fully automated ISO 9001 and 14001 certified factories.

Outstanding products

SolarWorld's modules were assessed by the ÖKO-TEST consumer magazine as "excellent".

An experienced industry leader

With over 30 years of experience in off-grid solar applications – SolarWorld delivers top products and technical experience at the highest levels. Our modules are installed in over 100,000 Telecom/Industrial systems worldwide. Nobody else comes close.

World‘s greenest solar manufacturer

The Silicon Valley Toxics Coalition named SolarWorld the greenest manufacturer in 2011. SolarWorld manufactures to the highest environmental and employment standards.

Performance Under Standard Test Conditions (STC)*
Maximum power Pmax: 140 Wp
Open circuit voltage Voc: 22.1 V
Maximum power point voltage Vmpp: 18.0 V
Short circuit current Isc: 8.35 A
Maximum power point current Impp: 7.85 A

*STC: 1000W/m², 25°C, AM 1.5 

 

Performance at 800W/m², NOCT, AM 1.5
Maximum power Pmax: 102.1 Wp
Open circuit voltage Voc: 20.0 V
Maximum power point voltage Vmpp: 16.3 V
Short circuit current Isc: 6.73 A
Maximum power point current Impp: 6.28 A

Minor reduction in efficiency under partial load conditions at 25°C: at 200W/m², 95% (+/-3%) of the STC efficiency (1000 W/m²) is achieved.

 

Component Materials
Cells per module: 36
Cell type: Poly crystalline
Cell dimensions: 6.14 in x 6.14 in (156 mm x 156 mm)
Front: tempered glass (EN 12150)

 

Thermal Characteristics
NOCT: 46 °C
TC Isc: 0.034 %/K
TC Voc: -0.34 %/K
TC Pmpp: -0.48 %/K

 

System Intergration Parameters
Maximum system voltage SC II: 1000 V
Maximum reverse current: 12 A
Increased snowload acc. to IEC 61215: 5.4 kN/m²
Number of bypass diodes: 2

 

Additional Data
Power tolerance: +/- 5 %
Junction box: IP65
Maximum outer cable diameter: 0.31 in (7.8 mm)
Maximum wire cross section: 0.006 in² (4 mm²)

 

Mechanical Characteristics

Length:

59.37 in (1508 mm)

Width:

26.77 in (680 mm)

Height:

1.34 in (34 mm)

Frame:

Aluminum

Weight:

25.02 lb (11.8 kg)

 
 
 
SolarWorld AG reserves the right to make specification changes without notice. This data sheet complies with the requirements of EN 50380.
 
 
 

The SolarWorld Sunmodule Advantage

Plus sorting get all the watts you pay for

SolarWorld unique plus sorting method ensures that our customers receive the watts they pay for. Every module is factory flash tested (at standard test conditions) to determine the peak rated power output, then sorted in 5-watt bin increments. SolarWorld power rating accounts for initial light-induced degradation (LID) so there are no surprises after installation.

With plus-sorting, SolarWorld delivers only modules that have greater than or equal to the nameplate-rated power. These power ratings are backed up with the factory flash report.

By delivering actual power, plus sorting ensures that systems operate at top eciency which results in maximum energy yield year after year. Plus-sorting eliminates nameplate uncertainty and our 5 W bin size makes mismatch losses negligible. Therefore associated de-rate factors in system modeling programs, such as PVWatts, PVsyst, and OnGrid can be minimized, predicting up to 5% greater annual yield.

SolarWorld linear performance guarantee long term performance assured

Because SolarWorld produces the highest quality, we can guarantee the best performance. That's why SolarWorld oers a 25-year linear performance guarantee* for all Sunmodule Plus panels purchased after January 1, 2011.

According to our guarantee, the actual power of a new module cannot deviate from the specified rated power by more than 3% during the first year; afterward, the power will not decrease by more than 0.7 percent of the rated power per year. So at year 11, the Sunmodule capacity is guaranteed to be at least 89.3% of the nameplate, compared with the industry standard guarantee of 80%. At year 20, it is still at least 83%, compared with the industry standard 80%. SolarWorld linear performance guarantee provides clear added value that you can take to the bank.

sunmodule-warranty.jpg

SolarWorld workmanship warranty

As a further expression of SolarWorld industry-leading quality, we have extended the Sunmodule product workmanship warranty to 10 years.