SolarWorld SW245 Mono 2.0 BLK - 245 Watt Mono Solar Panel
Pallet Quantity (30 Solar Panels)
As the largest and most experienced solar manufacturer in the USA, SolarWorld's Sunmodule™ Plus solar panels are designed and manufactured to the highest standards of quality, performance and durability. The mono-and polycrystalline products from SolarWorld come in variety of power densities, making them suitable for all applications – from a residential rooftop to a large-scale facility.
SolarWorld products are manufactured in state‑ of‑ the‑ art factories according to strict
German and US quality standards.
SolarWorld modules have been ranked number one for two years running in ongoing
comparison tests carried out by the Photon trade magazine. Sunmodule plus panels
generated up to 12% more yield than other major brand panels.
Plus-Sorting guarantees highest system efficiency. SolarWorld only delivers modules
that have greater than or equal to the nameplate rated power.
SolarWorld guarantees, over 25 years, that the modules’ performance will not decrease
by more than 0.7% per year – a distinct added value compared to industry‑standard
40' standard container: 420 modules
Double stacked 40' container: 780 modules
|Performance under standard test conditions (STC*)||SW 245|
|Maximum Power (Pmax):||245 Wp|
|Open Circuit Voltage (Uoc):||37.7 V|
|Maximum Power Point Voltage (Umpp):||30.8 V|
|Short Circuit Current (Isc):||8.25 A|
|Maximum Power Point Current (Impp):||7.96 A|
*STC: 1000W/m2, 25°C, AM 1.5Performance at 800W/m2, NOCT, AM 1.5 SW 245
|Maximum Power (Pmax):||179.7 Wp|
|Open Circuit Voltage (Uoc):||34.4 V|
|Maximum Power Point Voltage (Umpp):||28.1 V|
|Short Circuit Current (Isc):||6.65 A|
|Maximum Power Point Current (Impp):||6.37 A|
Minor reduction in efficiency under partial load conditions at 25°C:
at 200W/m2, 95% (± 3%) of the STC efficiency (1000 W/m2) is achieved.
|Cells per Module:||60|
|Cell Type:||Mono crystalline|
|Cell Dimensions:||6.14 in x 6.14 in
(156 mm x156 mm)
|Front:||Tempered glass (EN 12150)|
|Frame:||Clear anodized aluminum|
System Integration Parameters
|Maximum System Voltage SC II:||1000 V|
|Maximum System Voltage USA NEC:||600 V|
|Maximum Reverse Current:||16 A|
|Increased Snowload Acc. to IEC 61215:||5.4 kN/m2|
|Number of Bypass Diodes:||3|
|TC ISC:||0.042 %/K|
|TC UOC:||-0.33 %/K|
|Operating Temperatures:||-40°C to 90°C|
|Measuring Tolerance:||± 3%|
|SolarWorld Plus-Sorting1:||PFlash ≥ Pmax|
|Standard Packaging (Modules per Pallet):||30 pcs|
1) Temporarily, also modules with a frame height of 34 mm can be supplied.
Please inquire with your dealer.
2) The output identified by SolarWorld (PFlash) is always higher than the nominal output
(Pmax) of the module.
3) Depending on the market.
SolarWorld AG reserves the right to make specification changes without notice. This
data sheet complies with the requirements of EN 50380.
Because SolarWorld produces the highest quality, we can guarantee the best performance. That's why SolarWorld is the first solar company to offer a 25-year linear performance guarantee* for all modules installed after January 1, 2010.
According to our guarantee, the actual power of a new module cannot deviate from the specified rated power by more than 3% during the first year; and afterward, the power will not decrease by more than 0.7 percent of the rated power per year. So at year 10, the Sunmodule’s capacity is guaranteed to be at least 90% of the nameplate as opposed to the industry standard guarantee of 80%. This is added value that can help you get your project financed.